极品人生

 找回密码
 注册
搜索
极品人生 主讨论区 器材讨论 › 查看主题

167826

查看

473

回复
返回列表
楼主: 167
167

193#
发表于 2011-12-14 00:22:08 | 只看该作者
BD50比我的喇叭贵;有谁diy用他可是下血本了
guhelim 发表于 2011-12-14 00:18


2英寸只能是个中高音,我觉得使用的范围非常有限。
BD30+C173-6-090是一个非常好也非常NB非常豪华的架构了,可以先不考虑BD50了。

使用道具 TOP

194#
发表于 2011-12-14 09:18:56 | 只看该作者
三明治陶瓷振膜的低音最大可做到15寸,这是原厂消息2009年底公布的,至于什么时候可以量产也不知等到何年何月了。
The Sandwich Dome
- An entirely new membrane material from Accuton

--------------------------------------------------------------------------------

With CVD diamond and alpha corundum ceramics we have already two of the very best membrane materials on earth, so why search for a new one?

Let's summarize it: CVD diamond is definitely the best material available. It's stiffness to weight ratio is unsurpassed, the internal sound velocity unrivaled. However, until today, we can only make tweeter and small midrange units, cost and serious technical problems prevent the manufacturing of larger cones. It is quite similar with ceramic domes, these are second to and almost as good as diamond (still better than anything else exept diamond) but also restricted in size. The largest dome we can feasibly produce is a 160mm dome for the C220 series.

Doing research for larger bass cones we found some interesting results. Laser scans of moving membranes taught us that the voice coil area is the most critical and deformation is strongest here while the outer area is fairly stable (this is however only valid for concave domes like we build, not for different membrane shapes). So we took a special, exclusively made for us, white honeycomb membrane and doubled it up with a fitting, asymmetrically shaped ceramic dome (to put one and a half year of tedious research into one sentence). Let's look at the benefits:

Large cones (up to 15 inch basses) are economically producible
Stiffness in the VC area is even better as with a pure ceramic cone
Outer area has very high damping factor, the unit is easily usable with a first order passive filter
The ceramic part of the dome has an asymmetrical (Wankel) shape, killing resonances
The cone is indestructible, even at severe overload (remember, you can still burn the voice coil !)  
Bandwith and resolution is almost but however not as good as with a ceramic cone but this, after all, is not so important for a pure bass unit. Get more info about the family of Sandwich cone units here.....


使用道具 TOP

195#
发表于 2011-12-14 09:27:29 | 只看该作者
本帖最后由 hifiwcn 于 2011-12-14 09:30 编辑
您帖的这个图根本不是钕铁硼磁体的,是铁氧体的啊,很明显。
钕铁硼磁体的都是短音圈长磁隙设计的,如果 ...
167 发表于 2011-12-13 17:26

不好意思,请不要想当然,这个就是钕磁的。首先,从外观上讲,那一圈黑色不是磁铁,是吸振材料,ACCUTON的钕磁单元都有比较厚的防磁罩,所以显得磁铁很大。其次,市面上钕铁硼磁体的型号很多,从高磁能积、低工作温度到低磁能积、高工作温度的都有,两片低磁能积、高工作温度的钕磁完全可以用,而且还能保证磁铁寿命。

使用道具 TOP

167

196#
发表于 2011-12-14 09:45:47 | 只看该作者
本帖最后由 167 于 2011-12-14 09:57 编辑
不好意思,请不要想当然,这个就是钕磁的。首先,从外观上讲,那一圈黑色不是磁铁,是吸振材料,ACCUTON的 ...
hifiwcn 发表于 2011-12-14 09:27

呵呵,可能等您更进一步了解Accuton之后您会发现我说的是有道理的,现在,各自保留意见吧。
Accuton的钕铁硼磁体单元全是短音圈长磁隙的,没有长音圈短磁隙的,因为,按照您图片上的那个导磁板厚度,现在没有那种材料能经受得起这么大直径的钕铁硼磁体的磁通量而不饱和,更不要说是两片了,这一点,请坛子里精通金属材料的同学说说。钕铁硼材料我想更多了解一下,请您介绍一下低磁通量或者耐高温的钕铁硼磁体好吗,呵呵
我当然知道那个黑色的是后来涂上去的,因为我还见过涂之前的样子。
另外,纠正一下您的错误,Accuton低音是没有什么“防磁罩”的,那是上下T铁,或者称上下导磁板,国内一般称为华司......



Accuton的钕铁硼磁体单元,都是短音圈长磁隙的。
中间那个薄片就是钕铁硼:


本帖子中包含更多资源

您需要登录才可以下载或查看附件。没有帐号?注册

x

使用道具 TOP

167

197#
发表于 2011-12-14 10:01:29 | 只看该作者
三明治陶瓷振膜的低音最大可做到15寸,这是原厂消息2009年底公布的,至于什么时候可以量产也不知等到何年何 ...
tjj12380 发表于 2011-12-14 09:18

非常感谢您的资料。
我听说13英寸的三明治陶瓷盆低音已经有产品了,但是因为成本、售价的原因没有推上市场。
可能13英寸的陶瓷低音需求量没有钻石高音那么大........
如果有15英寸的,那简直是个“Dream Speaker Unit”

使用道具 TOP

198#
发表于 2011-12-14 10:53:32 | 只看该作者
bd50也有厂家用作纯高音的,德国SurrounTec 的Masterpiece,定价250,000欧元,装载一个超大型50mm钻石高音、两个8寸中音及两只11寸低音。

使用道具 TOP

167

199#
发表于 2011-12-14 11:55:07 | 只看该作者
本帖最后由 167 于 2011-12-14 12:42 编辑
bd50也有厂家用作纯高音的,德国SurrounTec 的Masterpiece,定价250,000欧元,装载一个超大型50mm钻石高音、 ...
tjj12380 发表于 2011-12-14 10:53

这个厂家还是蛮奇怪的啊,用中高音来当高音使,感觉这个箱子还是没有完成.......25万欧元,天价啊。
BD50当高音并不理想啊,看看下面的频响,15k的时候已经下去大约8dB了.....

本帖子中包含更多资源

您需要登录才可以下载或查看附件。没有帐号?注册

x

使用道具 TOP

200#
发表于 2011-12-14 12:43:10 | 只看该作者
有点搞不懂,哈哈用elac的蘑菇头补一下超高就行了,25w人民币就好了

使用道具 TOP

201#
发表于 2011-12-14 12:45:06 | 只看该作者
呵呵,可能等您更进一步了解Accuton之后您会发现我说的是有道理的,现在,各自保留意见吧。
Accuton的钕 ...
167 发表于 2011-12-14 09:45

偶确实没有认真看ACCUTON的PDF,谢谢指正!不过这个双层钕磁确是kharma员工说的,相信其的原因是kharma老板和accuton老板的关系还是很不错,kharma会拿到ACCUTON很多试验中的单元。大口径钻石中音原本用于最顶级的Grand Grand Exquisite,同时还使用两颗BD30和两颗BD20,但这箱子没有出来:

本帖子中包含更多资源

您需要登录才可以下载或查看附件。没有帐号?注册

x

使用道具 TOP

167

202#
发表于 2011-12-14 12:55:25 | 只看该作者
偶确实没有认真看ACCUTON的PDF,谢谢指正!不过这个双层钕磁确是kharma员工说的,相信其的原因是kharma老 ...
hifiwcn 发表于 2011-12-14 12:45

不客气,交流中又碰撞不怕,得出真知更好。
其实国内也有在Accuton订货较多的厂家,Accuton也会发一些样板让他们使用试验。
双钕磁的单元不是不可能没有,但是如果是这么大的钕磁,导磁板又这么薄的话,肯定是没法使用的.......
期待Kharma的旗舰音箱上第一个使用上13英寸陶瓷低音....

使用道具 TOP

203#
发表于 2011-12-14 19:36:02 | 只看该作者
偶确实没有认真看ACCUTON的PDF,谢谢指正!不过这个双层钕磁确是kharma员工说的,相信其的原因是kharma老 ...
hifiwcn 发表于 2011-12-14 12:45

这个箱上用的就是大口径的钻石中音?看上去也不过是平常所用的陶瓷中音。

使用道具 TOP

167

204#
发表于 2011-12-14 20:10:54 | 只看该作者
这个箱上用的就是大口径的钻石中音?看上去也不过是平常所用的陶瓷中音。
tjj12380 发表于 2011-12-14 19:36


不太像吧。低音13英寸,中音7英寸,其它的像是30mm钻石+20mm钻石

使用道具 TOP

极品人生 ( 粤ICP备08007514号)

GMT+8, 2024-7-3 02:04, Processed in 0.028154 second(s), 13 queries.

Powered by Discuz! X3.2

© 2001-2010 Comsenz Inc.