刚刚看到boulder2150，这个是新品吗？请知道的朋友给介绍下，万分感谢！

关注中，网上抄了一段，供参考。
[2150 Mono Amplifier]

Every electronic circuit within the 2150 Mono Amplifier is entirely new and all technological changes are primarily derived from Boulder’s 3050 Mono Amplifier.

Among the numerous changes and advances encompassed by the 2150 are:

Pure linear Class A operation. Bias current is actively monitored and adjusted in order to increase efficiency and reduce wasted radiated heat energy.

A new, high efficiency, microprocessor controlled standby mode reduces power consumption when engaged.

All electronic circuits and electronics are now surface-mount designs manufactured on Boulder’s own surface-mount manufacturing machines and ovens to increase reliability, consistency and optimized ground planing while at the same time reducing signal path length, PCB capacitance and noise radiation.

Gain stages within the 2150 are Boulder’s proprietary 99H2, which is unique to the 2100 Series amplifiers. 99H2 gain stages feature surface-mount electronic design and feature a new machined and potted housing to increase thermal stability.

The 2150 utilizes 80 output devices, 48 filter capacitors and 3 toroidal power transformers to generate power output of up to 1,000 watts into any load, enabling massive current swings and the ability to drive any loudspeaker to realistic audio levels.

Full Ethernet IP control capability and a 12V trigger minijack connection for use with advanced control systems and triggered home cinema installations.

Units will be available shipped at operating voltages of 100V, 120V and 240VAC.

A new and complete array of protection and status monitoring circuits are continuously active.

The physical and cosmetic changes in the 2150 include a slightly revised front panel and a new clear anodized top, bottom and rear panel with no powder coating or paint. All rear panel markings and indications are now machine engraved. Metal casework is cut on Boulder’s own four CNC machining centers.

回复 tcsbj 的帖子
非常感谢！

   

继续关注。
2110 Preamplifier：　$54000
2150 Mono Amplifier：　$98000 /pr

[2110 Preamplifier]

With the exception of the front panel buttons and volume control disc, every part and circuit of the 2110 Preamplifier is new and has been redesigned, marking a complete evolution of the 2010 Preamplifier.

Some of the significant changes in the 2110 include:

The complete preamplifier is comprised of four chassis and features the total isolation of left and right audio channels, logic and user interface sections, and power supplies.

A separate 2100 Power Supply chassis houses four independent power supplies for left audio, right audio, logic and user interface, and standby/power-on.

A new, microprocessor-controlled, high efficiency standby function reduces power consumption while in standby mode.

Complete surface-mount circuit board construction manufactured on Boulder’s own surface- mount pick-and-place machines and ovens to increase reliability, consistency and optimized ground planing while at the same time reducing signal path length, PCB capacitance and noise radiation.

New, ultra-low-noise, surface-mount design 993S gain stages encased in a fully machined and potted housing for thermal stability.  Redesigned high-visibility white LED front panel display.

New, modernized front panel designs for both preamplifier and power supply chassis. The  preamplifier front panel features a new wraparound, custom ground, mirror-glass display window.

Next generation of Boulder’s CMOS actuated stepped volume control incorporates full-balanced  operation for a lower noise floor and elimination of any step noise.

Full IP control via Ethernet for use with advanced control systems.

12V trigger out for remote turn-on of connected amplifiers.

New, completely machined casework milled on Boulder’s own CNC machining centers. Sheet metal has been eliminated and all casework is now interlocking machined 6060-T6 aluminum.

Powder coating and paint have been removed complete preamplifier’s finish is bead blasted and clear anodized.