喜欢第一个组合，有很多成功案例。
167 发表于 2011-1-9 14:52

三个方案，投资不同，功放搭配也不同。对于刚开始DIY的人来说，第一个组合的成功率高一些，第三个最具有挑战性。

回复 David 的帖子
兄弟,我菜鸟一个,还望你多指点.
   

diy,测量是个大问题.

回复
大师,就普通形式吧,我想丹拿加at你一定会赞成,高音就定330了,at6.5寸烦请你推个具体形号,到时还需要 ...
zzbb1170 发表于 2011-1-9 14:57

千万别乱叫什么大狮的，你和我都会很别扭。
帮个忙什么的没问题，只要是我能力范围之内的

回复 zzbb1170 的帖子

一、请看AT怎么说吧：
The Flexunits system was developed to fulfil individual data as desired, and we are able to meet even the most specific individual requirements – mechanical as well as electrical.

Fs, Vas and Qts can all be modified and the coil former can be made of either aluminium or Kapton. In special cases the cone material and suspensions can also be changed.

Gap height and coil length as well as diameter can be selected individually and the magnet size can be altered to fit the needed strength required.
For the less experienced customer, we have made a line of multipurpose drivers, represented by each size, from 4” mid-woofers through 15” subwoofers, enabling you to approach a project, the more conventional way. It is also possible to use one of the standard drivers as a raw model, and getting parameters changed in the direction you wish.
To specify your requirements please use our specification form. Remember that we can only work within the physical laws of nature.


二、下面是一鬼佬的推荐

Driver recommendations - Audio Technology

AudioTechnology is one of the world's most highly regarded manufacturers of ultimate quality drivers. Its Flex Units series is designed by Ejvind Skaaning, a founder of both Scan-Speak and Dynaudio. Flex Units are notable for all using some of the best motors in the business - comparable to the best that Lambda, TC Sounds, or Scan-Speak have to offer. The Xmax-to-Xsus ratio is typically 2.5:1 of greater. Audio Technology is perhaps the ultimate specialty woofer vendor, offering a limited range of standard drivers, although they do offer an almost unlimited range drivers built to order.

Note that the following list includes the entire standard Flex Unit line.
1.        The 4H521306 is a 4" driver using an underhung motor suitable for both mid/bass and midrange duty. The FR is +/-2 dB from 100-5k Hz. One of my respondents wrote. "The Audio Technology 4" is absolutely outstanding, in every way.  It does require the best associated crossover components.  No evil habits, very transparent, clean, musical, timbral accuracy extraordinary, excellent dynamics, stays alive at low levels, worth every penny.  Easy to crossover also.  Does not have the high end peak that the [Madisound/Skaaning] SK130-308 does."  view   response  
2.        The 5H521506 is a 5" driver suitable for both mid/bass and midrange duty. The FR is +/-3 dB from 100-4k Hz.  view   response  
3.        The 6H521706 is a 6" driver suitable for both mid/bass and midrange duty. The FR is +/-2 dB from 90-4k Hz.  view   response  
4.        The 8I522008 is an 8" woofer with smooth FR up to 2 kHz. Modeling suggests that it would work well in a TL enclosure.  view   response  
5.        The 10A772510 is a 10" woofer with smooth FR up to 1 kHz. Modeling suggests that it would work well in a TL enclosure.  view   response  
6.        The 12B772510 is a 12" woofer with smooth FR up to 1.5 kHz. Modeling suggests that it should maintain extremely high output into the 30's using a vented or PR enclosure. In a TL enclosure, it should reach the high-20's.  view   response  
7.        The 15E1022510 is a 15" woofer with smooth FR up to 300 Hz. Modeling suggests that it should maintain extremely high output into the 30's using a vented or PR enclosure. In a TL enclosure, it should reach the high-20's.  view   response  
All Flex Units are among the most expensive drivers of their respective sizes on the market. The curves and numbers on all units are exceptional. Everyone who's ever seen and heard one agrees that they're magnificent in both design, craftsmanship, and audio quality. Certainly, the exceptional impedance curves reflect their extremely sophisticated and costly motor designs, which are capable of exceptionally low distortion. However, whether they're sufficiently wonderful to justify the price may be subject to debate, depending on your circumstances. Perhaps it will help if you consider them as instruments or works of art rather than drivers…

三、上面鬼佬的推荐只是针对标准型号的Flex Units单元，也就是AT所说的“For the less experienced customer, we have made a line of multipurpose drivers”。定制单元时，您可要求个性化的Fs, Vas和Qts数值，这些参数决定了音箱的型式（密闭、开孔）、容积、低频延伸、灵敏度等指标。具体选择什么型号的，尚需您自己拿主意。如欲省事，建议征求厂家或代理的意见。





   

期待 zzbb1170 师兄的 T-330D + AT 靓声音箱, 最好来个直播~