|
本帖最后由 records33 于 2014-10-15 20:00 编辑
回复 当当当 的帖子
设定请参考厂家的手册:
Unless ordered otherwise, switch settings are factory set as follows:
Phone: 60dB,1KΩ input impedance
Balanced Line Input: 6dB gain,1MΩ input impedance (+)
Consult the diagrams on pages A1 and A2 for proper settings of switches located inside the Encore 1MΩ Preamplifier.
Page A1:
BALANCE LINE INPUT (ONE CHANNEL)
SW3:
1 on , 2 off (+) input impedance :10 KΩ; Gain: 0 dB, (-) input impedance :10 KΩ
1 off , 2 off (+) input impedance :1MΩ; Gain:7 dB, (-) input impedance :10 KΩ
1 on , 2 on (+) input impedance :10 KΩ; Gain:+12 dB, (-) input impedance :1 KΩ
1 off , 2 on (+) input impedance :1MΩ; Gain:+18 dB, (-) input impedance :1 KΩ
Note:
For unbalanced sources set switches 1 & 2 to off.
For balanced sources set switches 1 on & 2 off.
Page A2:
PHONE (ONE CHANNEL)
SW1:
1 off , 2 off Gain: 36 dB,
1 on , 2 off Gain: 47 dB,
1 on , 2 on Gain: 60 dB,
SW2:
1 off , 2 off 50K/220pf,
1 on , 2 off 10K/220pf,
1 off , 2 on 1K/0.01uf,
|
|