技术参数: Kawero Ultimate Edition Kaiser Acoustics Speakers Kaiser Acoustics Started as a private project, duration of development was 7 years. Uses the very best materials and components available Psychoacoustic science and room acoustic knowlegde greatly influenced thedesign. Crossover ·
Custom made Duelund CAST capacitors and inductors ·
Mundorf silver/gold/oil capacitor ·
Mundorf CFC10 inductor in woofer section ·
3D-design placement to avoid crosstalk ·
between the inductors. ·
No resistor in the crossover! Cabinet ·
Tankwood (bullet proof wood) ·
Special damping sheet from automotive (Mercedes E-Class) ·
Non parallel walls ·
Internal brackets and bracing ·
Divine ratio for internal volumina ·
Homogenious distribution of eigenmodes (resonances) Internal Wiring ·
Special custom made Echole Obsession wiring. ·
Special resonance treatment from Echole for harsh environment. ·
Inside our speaker cabinet up to 140 dB SPL can occur. Kawero Features ·
Perfect step response (Tweeter distance adjustable), very important for soundstage ·
1st order all pass filter without any electrical components ·
Perfect Power Response, due to baffle step equalisation most speakers havea notch in the power response ·
Kawero adds missing energy due to rear firing woofer and passive radiator. ·
Power response is very important for tone colours ·
No inhomogenious radiation, as Tweeter can rotate ·
Target response developed with psychoacoustic science ·
Blauert Band design for realistic height of voices ·
Crossover point over λ/4 resonance ear – ear drum ·
Haas precedence effect considered and implemented Specifications Drivers: ·
Custom made RAAL Sandwich ribbon tweeterwith amorphous core and special damping technique ·
Custom made cone drivers from Audiotechology ·
10“ woofer with 4“voice coil, special hybrid VC-former ·
7“ wideranger with 2“ underhungVC, very special aluminum VC-former ·
Design:
3 way design (reflex loaded midrange and woofer) ·
Bandwidth:
25 Hz to 60 kHz (in room) ·
Sensitivity:
92 dB @ 2,83 V / 1 m ·
Impedance:
6 ohms nominal, 4 ohms minimum ·
Input power:
20 watts minimum ·
Connectors:
Single wiring (Bi-wiring upon request) ·
Height:
45.7 in (1161 mm) ·
Width:
13.0 in ( 330 mm) ·
Depth:
19.4 in (492 mm) ·
Weigth:
208 lbs (95 kg) / piece ·
Finishes:
top quality veneers or piano laquer
|