|
|
英国 SME Series M2 Tonearm Series M2-9唱臂 价格：12500
有意来电或微信15026609921
Series M2 Tonearm
The Series M2 embraces three models the M2-9, M2-10 and M2-12 offering pivot-stylus dimensions covering virtually all turntable requirements.
These arms offer at reasonable cost, meticulous build quality with all the most important features including lightweight stainless steel tonearm, detachable magnesium headshell with azimuth adjustment, tungsten balance weight, superb quality ball race bearings etc., and a level of stiffness and rigidity to suit all types of cartridge.
These precision pick-up arms embody well tried SME principles and are suited to a broad range of cartridges including those of medium and low compliance.
Series M2-9 is the standard arm having a pivot-stylus dimension of233.2 mm (9.18”) and will therefore be the one most frequently used.Typical effective mass 9.5 grams.
The internally damped tonearm of highly polished stainless steel provides sparkling uncoloured reproduction. A unique single element balance system caters for cartridges weighing 5 to 12 grams. After balancing tracking force is applied by forward movement of the weight ensuring the lowest system inertia. The weight moves on a precision screw thread with backlash eliminator allowing exact setting of vertical tracking force.
Series M2-9Distance from pivot to stylus 232.20mm
Distance from pivot to turntable centre 215.40mm
Cartridge fixing centres 12.70mm
Overhang 17.80mm
Height above mounting surface 87.0mm max 63.0mm min
*Note Spacer P1, part no. 3823/IV is required when the turntable surface is more than 41.30mm above the surface on which the arm is mounted
Height of record surface above mounting surface 67.40mm max 43.40mm min
Depth below mounting surface 46.0mm
Radial clearance for balance weight 51.0mm
+ - Tracking adjustment 12.70mm |
本帖子中包含更多资源
您需要登录才可以下载或查看附件。没有帐号？注册
x
|
发表于 2016-12-1 10:03:16
| 
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡