EMM DAC2X是否可以当前级使用？之前好像在那里看过说可以........如果可以：
1.怎么调整？
2.如果能当前级使用了，音量的大小通过什么来控制？
紧急求助！请高手指教！

也在用DAC2X. DAC2X 两个音频输出端 LINE LEVEL 都是不可调的, XLR ( 夲人在用) 為4.6Vrms, RCA為2.3Vrms. 音质用XLR输出最佳.前级在系统中致关重要,建议不要省略.
EMM LABS 7月份剛公佈DAC2X 软件升级,升级后据说DSD 和PCM 解码水平更上一层楼.夲人单元為6月份新品,就旡须升级了.

打开DAC2X与MA-1对比，实在找不到有多大区别！有人知道区别是啥不？

请问二楼，升级软件哪里下啊？官网好像没有。

回复 pcmsc 的帖子
外壳 差别大：）

   

回复 smarterli 的帖子


    公布新软件升级啦？我不知道啊！我也一直关注这个事情。请兄告诉我，该如何升级？我是香港极品的行货，还在保修内。我的型号是：TSDX+DAC2X

回复 dx300 的帖子


    嗯，倒不是想省掉前级，就是之前看过说有这个功能，已经给厂家发了邮件，等回复呢。

回复 LCL123 的帖子


    弄么，OCTAVE HP500SE。

前级的作用 很大的， 千万不要以为带前级的机器 可以作为独立的前级用。你可以与原先自己用过的Mark 前级对比 就清楚了。

emmlabs后期的解码器都已取消了前级功能，还是老老实实买个前级吧

MDAT2 软件升级要䓁到8月中旬后, 但DAC2X的年度升级已经7月份开始了.凡DAC2X的拥有者,可与代理商联系索取链接和宻码即可下载,程式较大在zip內,电脑要有zip软件才可取出内容. 升级后的DAC2X 在细节和音㘯及动态方面有很大進步. 下面為关于MDAT2 EMM 官方发布:

More than a year in development and testing, EMM Labs and Meitner Audio is proud to announce the release of our MDAT2 DSP update that will take all our current DAC platforms (DAC2X, XDS1 V2, MA-1, MA-2) to that next level in audio performance.

MDAT is our high performance multi-award winning DSP engine. It takes all digital audio (PCM and DSD) and does real-time transient filtering and up-conversion to 2xDSD (5.6Mhz/6.1Mhz) before being sent to Ed`s proprietary custom made 2xDSD (5.6Mhz/6.1Mhz) DACs (MDAC modules) for conversion to analog.

With MDAT processing, there is no pre and post ringing (please see MDAT .JPG diagram), which is why MDAT unlike any other processing technology is unique in its ability to preserve the phase, frequency and dynamic integrity of the waveform.

In MDAT2 we have built an improved new DSP engine with:

· Increased sonic detail from all digital audio streams (PCM and DSD) using new high-resolution algorithms

· Time and frequency response filters that are greatly optimized

· A new signal processing engine that is built for very high-precision audio up-sampling (2xDSD up-conversion)

· A new more accurate 2xDSD up-sampling algorithm

Think of it as supercharging your DAC! Accuracy, transparency, soundstage, low level detail all greatly improved and refined. All these improvements providing the listener with a more immersive experience and bringing further all music to life. The best thing is….you will receive this new MDAT2 engine for free!

For those with current EMM Labs (DAC2X, XDS1 V2) or Meitner Audio (MA-1, MA-2) products contact your dealer or distributor to schedule the update being released shortly after the HK Show (middle of August 2014).

MDAT and MDAT2 are both patented. Associated algorithms are patent pending.

Source: Press Release

回复 smarterli 的帖子


    问代理商要的话，收费吗？还是免费的！