不见得。
弹簧安装好与调整好要求的时间完全不一样。

支持

LINN的安装调整是比较简单的，如果要四个小时，说明安装的人自己水平也不够熟练。

我其实很好奇新手是如何学会装LP的，那东西网上连个教程都没有，手把手教都有难度，难道就靠打电话和看图片就能精确调整？问过名线屋的老板，调整一次LINN，差不多都要四个小时，楼主和某些人都是大神级别的。

LINN SONDEK LP12 唱机（红实木底盘）

LINN KANDID MC 旗舰限量版MC唱头

LINN EKOS SE 旗舰唱臂

LINN RADIKAL 顶级外接电源器

汕头新天标价78000的那款lp12不知道包含哪些配件。

6万多包括整套AKURATE(含唱机，唱臂，唱头）加上uphorik唱放。不含箱子。

6万多是不可能有KEEL的

用linn的唱头才有需要3支螺丝，其他唱头2支就行了
Linn Keel一体臂版有配吗？

恭喜楼主啊，我也是用的一样的akurate lp12, 不过lingo和uphorik我选了黑色。顺便发一张三个钉的图，快让泽森给你补发。
不知道你有无用xlr的T cable。买uphori的原因之一就是有xlr的输入，提升很大。看莲怎么说：

Hi
The fundamental difference is the screening. A Cartridge is a single ended coil. One end is connected to the reference ground of the gain stage, the other end is the signal which is connected to the input of the gain stage. The gain stage multiplies the signal level at it's input relative to it's reference. So if the reference end of the cartridge has noise modulating it, then the output of the cartridge has the same noise modulation.

With an RCA cable, the screen is the reference signal AND the screen which prevents noise pickup to the wanted signal. However as it is the screen, it inevitably picks up unwanted noise and sinks it to the reference of the gain stage.

With an XLR cable the reference signal is twisted together with the cartridge signal so there is no noise difference between the two so the input signal relative to the reference is "cleaner". In addition there is a dedicated screen which sinks the unwanted noise to chassis rather than the reference of the gain stage.

I hope this helps. My advise is buy the XLR cable you will not be disappointed.

Regards
Ian

恭喜，看到下面经典的国货MT-12（还是35？）。我的第一个入门功放，这几天都还在用它听歌，十几年了。真对得起2400的售价！

一个是唱放一个是电源