用钻石吧，你玩好了，我复刻一对，增加兄弟你的成功感！

阿明 发表于 2015-5-4 21:40
当然，也有大侠推荐了当红的accuto C30-6-358陶瓷高音，从外型上看这款高音和ATD是最协调的，

请玩过ATD ...

DUKE和CC合体，会有什么样的火花呢

我就用的ATD5寸+蒙多福的1908气动，分频在3k，4阶分频。
气动的特点是透明，失真小，缺点是分频点不能太低

trus 发表于 2015-5-5 14:39
AMT2510C气动高音频率900HZ-2800HZ,分频点可以选低一点

是在用AMT2510,分频点设在2300,觉得没有什么不妥,也曾试过设在2800,还是2300好

可以考虑西亚士0058铍高音，这高音分到1800HZ都没问题

我用7寸ATD的电分三分频。既然你有330 建议用330来搞电分三分频玩一下，同时也可以功分嘛，都玩玩，多好！！！

个人以为，与ATD最搭的高音是RAAL，无论声音还是外观。玩好了RAAL，钻石不碰也罢。

     都是坏人，哪个贵推荐 哪个。
    春节期间在广州林生家听过全套采用accutou陶瓷单元的德国isophone落地箱，被陶瓷单元那温暖、高贵的声音所折服，也想在新的书架箱中尝试一下新款cell系列陶瓷的魅力。
    高音就决定用c30-6-358了，再说近来欧元贬值，这对高音在淘宝上5000多元就可以买到，价值还是挺给力的。
   大家如果有意一起团购c30-6-358的，请悄悄留言吧，估计团购每对还可以便宜一些。


不知坛上有哪位大侠用过这款高音？

RAAL用过70-10D，分频点3000HZ，非常喜欢。还有一对70-20XR，尚未开工。如果分频点选择得当，RAAL铝带高音既没有软球顶高音的朦与肉，也没有硬球顶高音的亮和厉。RAAL这货就像是根本不存在一样，完全隐形，但该有的细节一丁点儿都不会缺，而且是以极其自然的方式展现出来。但如果分频点选择不当，高音与中音会给人“脱节”的感觉。最重要的，RAAL的价格不变态。

又开始新的征途了，到时直接复刻一对😄

70-20XR分频点1800HZ（只串一个电容即可实现四阶分频，详情请看他家官网）。价格大概在7000到8000元一对，不过这个型号是不向个人（DIYer）出售的，您用谷歌去网上搜一搜吧。境外网上时常能看到有鬼佬出售，不过很快就被抢走。

http://www.raalribbon.com/products_flatfoil_70-20xr.htm

World’s smallest form factor for a true ribbon of just 1.8 kHz cutoff frequency, reliable, able to handle a lot of power, sounding like it doesn’t exist... All that by using only one series capacitor as a complete L-R 4th order crossover at 1.8k, combining acoustical and electrical slopes, with minimum of added passive crossover components. Featuring three transformer taps for resistorless sensitivity adjustment, ribbon replacement kits, custom front plates, copper soldering posts...

All of it, makes it perfect for reaching new limits in high-end home stereo or multichannel and near-to-mid field studio monitoring applications.

It was developed according to the wishes of the most demanding manufacturers, that were looking for a quantum leap in true ribbon design.

The exact process of making it, will remain a well kept secret. Being different than anything else, including other RAAL models, 140-15D and 70-10, it is available only to manufacturers, only under previously signed Non Disclosure Agreement.

For further info on 70-20XR, please, send e-mail inquiry to info@raalribbon.com, stating your company data and your position in the company. If you wish, you can include a brief description of your project. You will receive a brief .PDF datasheet, with basic measurements and data. If you find it fit for for your project, we will proceed with signing Mutual NDA and after that you can receive paid samples.